Posted by: Chappo December 11, 2022 10:57 pm
Moin,
my good old Solis Master 5000 coffee machine has the following problem:
Coffee only flows into the cup when hot water is briefly drained through the frothing nozzle.
Decalcification only leads to a slight improvement in the problem. And the hot water jet only flows very weakly afterwards.
What could be the reason for this?
Posted by: Schlawi December 12, 2022 07:05 am
The machine will have the old aluminum spoiler. If the is closed then this can happen.
Can then look like this.
https://www.andyfaq.de/img/verkalkung_large.jpg
Bean2cup.org > Saeco > Passage problem Solis Master 5000