Impressa E75 - Coffee too thin

sodalic Problem solved...
It would be possible that someone made a small mistake with the sealing ring during his disassembly and assembly action, which connects the powder shaft with the "coffee funnel".
The seal protruding into the powder shaft concealed half of the opening of the grinder outlet, so that a kind of coffee jam occurred. What the hell, better late than never.
Thanks for the support.

However, how could it be otherwise, there is another problem....
Every time I have opened the machine, water escapes from the machine after the first cup of coffee. It drips somewhere in the area behind the hot water nozzle switch (top right if you look at the machine from the front, top left if you look at the machine from the right). Unfortunately, I can't pinpoint this exactly, because it really only happens at the first cup. After that, everything's dry as a bone. Even after a switch-off and switch-on process, it does not happen again. It's funny, because I didn't repair anything in that region. I can't figure it out.