Melitta caffeo solo

I have the same problem but I think that the pressure is reduced after the brewing process, but it is strange with the rinsing process. Why is the spout in the front not flushed better. Most of the water runs into the bowl. I still have an AEG with Jura brew group. When I clean it, everything comes out the front.

И аз имах същия проблем. Регулирайте нивото на смилане на кафето. В момента е на най- ситно и се запушва. Оставете го в средно положение и всичко ще е о.к

Why is there always so much water in the drip tray when brewing coffee?

We know it in a similar way. In our case, it was the brewing unit. We took the filter out, put the whole unit in warm water for a day (according to Melitta-Servise), cleaned it thoroughly, put the filter back in and replaced the seals. The problem was then solved. In order to be able to remove and replace the unit easily, it is essential to grease the seals of the connections and the drive axle (thinly) from time to time (special grease from the accessories).
Originally, there were also instructions from various manufacturers to grease the brewing unit in other places, but Melitta refuses to do this, despite having the same brewing unit. Saeco and others have the same brewing unit and more experience than Melitta. Search for: "Grease Saeco brew group". You're sure to find what you're looking for.

Unfortunately, as a guest you can no longer edit the post. So you'll have to live with my spelling mistakes on my stupid cell phone.