QUOTE (GeorgH @ Monday, 18 October 2021, 10:56 PM) |
Now I have searched again something on the Internet and have found. If the brewing unit cannot be removed, the following trick may help: Open the door, turn the brown round part of the brewing unit under the red handle to the left with some force - cracks loudly. Restart the machine
Maybe it helps some of you.
Here is a YouTube video for cleaning and greasing the brewing unit of the EQ.500:
Greetings, Georg |
Open the door, operate the switch with a pointed object until the brewing unit wobbles , then remove
After that, often the message : restart the device- mark the entrainment bolt on one side, then again with a pointed object again.... until water is conveyed and the bolt rotates again , set parallel, if it does not work at the marked point again, then set the unmarked point forward.
close
Share this post: