Melitta Caffeo CI - Water runs into a drip tray

Hello coffee friends,

I need your swarm knowledge.

Enthusiastically I have read your tips around this topic and was also already very active in the implementation.

Briefly to the state of affairs:

# Initial situation

Machine has been losing water on the left side for some time. However, coffee is delivered reliably.

The machine is cleaned regularly, once a week completely (manually and through the appropriate programs).

After cleaning with cleaning tablet then all of a sudden no more coffee output through the coffee spout, but completely into the drip tray.

Program "Cleaning" also completely in drip tray.

# Measures

After your tips the following measures implemented:

- Replace brewing unit seals (no change
)- Replace drain valve (no change)
- New brewing unit (no change

)



Flowmeter was already replaced with a new one about 9 months ago.

Now I need you: Which adjusting screw can I turn now?

Thanks for your help!

GreetingsAndreas

Hello everyone, after a cleaning process, the coffee runs completely into the drip tray, also there is always water in the basic coffee container. I have recently completely replaced the drain valve +brew group. Does anyone have any ideas?

I just bought a Melitta second hand and I did test it and it worked. I cleaned it and now it’s not working. I think it’s dumping into the tray. When I pull the brewing unit out there is coffee everywhere and sludgy on the brown ramp bit. If I do 130ml eventually coffee comes out but it’s very weak and sometimes if I lift the water tray slightly the tone of the pump changes and it pours. Can anyone offer any advice. Thanks

QUOTE (Martin (Hobby Technician) @ Thursday, 12 November 2015, 12:00 PM)

Do not despair Google ask. They certainly know where there is a service. Otherwise, please google GIDF... there you will also find a good tip.

Hello all, we have our just got new and also have the problem that the coffee or water runs into the drip tray.
So there should be no defective parts.