QUOTE (Latina @ Wednesday, 19 January 2011, 01:39 h) |
Today also purchased the Siemens mill -currently very cheap at Media M. Received excellent instruction and info on the machines there + internet. During the first setup I also encountered the "jamming" of the brewing unit, despite following the instructions for use, i.e. moving the red slider to "up "and then pressing the rear red shutter.
Solution: the 2nd red slider unlocks the unit when pressed, but it must be held down when pulling the unit out! Unfortunately, the picture in the instructions does not show this. A tip for practice: while the right hand grasps the right handle (as instructed), the red button can be held down with the little finger of the hand, so that the unit is now easily released when pulled. The already feared way to the customer service should be spared with it. Whether this is a general problem of the type, I cannot say. Please give me feedback if it works now.
Latina |
Hello all ,
Have the same problem. That the brewing unit is stuck .
Do not know yet what a 2nd red lever ?
The part has only a lock lever red, to lock the grinding and brewing part.
Got it out again, with plug pull, switch off - on, jiggle the brewing unit, pull, lift, press .....dann gings ...
Greetings Thomas from Munich
close
Share this post: