Necta Koro Error message:Air Brake

Hello

I have a problem with my coffee machine, after switching it on it works, but when you take a drink it will be displayed, device out of order Air Brake" This doesn't always happen (not right after the first drink) After I turn the machine off and on again we display,:initialize db"I know that you have to press a button in the machine to continue, but then we come back to the Air Brake.

I hope you can help me

MfG
Maximilian

Hello,
Just saw your question today.
You may still have the machine.

I am not fit at Koro's, but I occasionally wait for big machines from Necta.

Initializare db. ---
here the installation and initialization will be done.
there you can e.g. set language etc.

I don't know the key assignment of the Koro, but there are 4 assigned keys at Necta:
- before / greater
- back / less
- confirm / further
- back / ESC / quit

Find out which one is and run 'Initialisare db' once completely through.

Air Break:
The AirBreak is the small float tank with the micro switch.
It controls the water supply to the boiler.
If the micro switch gives a signal too often or too rarely or too long,
it goes to error message.

Example:
If the water supply is not open, no water arrives in the machine.
The float in the AirBreak goes down, opens the micro-switch, the micro-switch
opens the water valve, water DOES NOT come, micro-switch stays open..... Error message.

May be your machine is working again.
Greuss

Mines sayin air break and water keeps squirting out of a pipe inside, any ideas on sorting this

Mine is spirting water out of a tube inside saying air break any ideas on repairing this much obliged

QUOTE (guest_automatic_man @ Saturday, March 21, 2015, 7:19 pm)

Hello ,Just saw your question today. Maybe you still have the machine. I'm not fit with Koro's but I do occasionally service large machines from Necta. Initializare db. --- here the installation and initialization is done. there you can set e.g. language etc.. I don't know the key assignment of the Koro, but there are 4 assigned keys on Necta: - forward / greater- back / smaller- confirm / continue- back / ESC / exitFind out which is which and run 'Initialisare db' once completely . Air Break: The AirBreak is the small float tank with the micro switch . It controls the water supply to the boiler. If the micro switch gives a signal too often or too infrequently or for too long, it will go to error . Example: if the water inlet is not open, no water arrives in the machine . The float in the AirBreak goes down, opens the micro switch, the micro switch opens the water valve, water does NOT come, micro switch stays open..... Error message. Maybe your machine is working again. Greetings

Hello,

I have a Necta Korinto. My problem, too little coffee powder. Have in the menu the gram number of 7.5 already up to 9 grams ... Nix comes because of this no longer and the coffee tastes watery. An idea???

VGChristoph

I have a Necta Korinto today all of a sudden it started giving coffee group failure error. Can anyone help me with this? Do you know what to do?