Impressa F70 - After cleaning system, does not fill

Hello, dear ones,

we have exactly the same problem. After 30 min I emptied the
water
again,

inserted a new cartridge,

filled the tank with fresh water. Afterwards foam nozzle turned up, message: Tap onMessage
: System fills. No
harm done. After approx. 15 sec. Message: Cock closed. It didn't happen.
Also already all
further cleaned.
Question: Is event. Pump or regulator or flowmeter faulty
.
Look forward to your
feedback.

Best regards Willi

Is the pump even running? If so, then little stucco of lime something clogged.

A "cleaner liquid" doesn't get into the water tank.

There goes descaler.
So please clean and decalcify
properly.
I think the problem is more the "cartridge"... I'm guessing a descaler cartridge.
As
long as the pump is still running, please remove the cartridge and operate the device without checking if it works better
.