EA829E Fully automatic coffee maker Latt´Espres

Hello first of all,
complete newcomer to the subject of repairing coffee machines.
The following problem:
The machine wants to fill the water circuit again and again.
I saw here in the forum that this is due to the flowmeter.
Now I have started to disassemble the machine to get to the said flowmeter.
Unfortunately I failed directly at the disassembly of the front panel (silver).
Behind the screws for further disassembly are hidden.
How do I get rid of the thing ??
Can someone help me here ?
Many thanks in advance
Achim

I have the same machine and the same problem. I've also seen what it's all about now, and I can't imagine the engineers have thought of it that way
: if you remove the small panel
that's under the "warming plate" (where you put the cleaning tablet), you can take a look inside and see what happens when he wants to fill the circuit.

Since the ground coffee simply "falls" into the middle of all the serious coffee, it gradually clogged everything in my case (probably due to too fine an adjustment of the grinder), so that the "brewing head" (I have no idea) could no longer fully shut down.



I took a vacuum cleaner, put a piece of hose on the front (because there's not much space in it) and carefully

vacuumed away

all the coffee

.

Behold

, I am well again.

I made a video, if that's unclear

.