Advanced search

aeg cafamosa cf 120

milk frother

minimaedels

August 28, 2014 10:48 am

*

Coffee drinker

Group: Mitglieder

Posts: 2

Member No.: 24974

Joined: August 28, 2014

Hello, we have the AEG cafamosa cf 120 and I've seen somebody have an attachment that foams the milk directly from the pack/vessel into the cup. I don't know how to describe it cool.gif
Hoffe someone understands what I mean and can tell me where to get it.
Many thanks

numberonedefender

August 28, 2014 11:12 am

*

Expert

Group: Mitglieder

Posts: 2539

Member No.: 2650

Joined: August 21, 2008

This part is called an autocappuccinatore, there are a lot of different ones. A prerequisite for the proper operation of this part, however, is the installation of a short steam pipe on your machine.



--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

kaffeechris

August 28, 2014 11:27 am

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

Yes this thing is called, the Autocappucinatore can get ma cheap or expensive depending on the model, the old milk frother must be taken from the steam / hot water pipe, but it should not protrude longer than 4cm from the machine. If there is a M6 thread on it and looks very fine then the car is simply screwed on... there.
MfG Chris



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

kaffeechris

August 28, 2014 11:31 am

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

If it should be so that you need there a thread for and it can be dismantled, I will cut there gladly one on it, you must then send here.
Also an Autocap. supply.
Then write by PN
MfG Chris



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

minimaedels

August 28, 2014 01:33 pm

*

Coffee drinker

Group: Mitglieder

Posts: 2

Member No.: 24974

Joined: August 28, 2014

QUOTE (numberonedefender @ Thursday, August 28, 2014)August 2014, 10:12 am)
This part is called Autocappuccinatore, there are a lot of different. A prerequisite for the proper operation of this part, however, is the installation of a short steam pipe on your machine.

Hello, I found this cappuccinatore now too. Does the old steam pipe have to come off? ? Or could it stay on?
Can I otherwise unscrew the old steam pipe like this?
Many thanks for the tips

numberonedefender

August 28, 2014 02:17 pm

*

Expert

Group: Mitglieder

Posts: 2539

Member No.: 2650

Joined: August 21, 2008

The old steam pipe is simply too long to be able to use the Autocappu properly, so either shorten it and cut the thread or replace it with a short one, but for this the machine has to be opened and partly disassembled...



--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

kaffeechris

August 29, 2014 08:45 am

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

Well, there you can write what you want, only read it is not.
MfG chris



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.