Advanced search

back

New Topic

AEG Coffee Grande CG 6600

Display shows Device heats 100%

chrisoli

September 19, 2011 07:33 pm

*

Coffee drinker

Group: Mitglieder

Posts: 7

Member No.: 12614

Joined: July 18, 2011

AEG CAFFEE GRANDE CG 6600

Hello have a problem with machine described above, the machine switches to normal brewing group drives and shows on display device heats . She then also shows the percentages of the heating process and goes up to 100% there she stops and then does nothing more .
Can possibly help me someone further .
PS: The cup warmer gets warm, that is, the thermoblock also heats !

jokel

September 19, 2011 08:41 pm

*

Expert

Group: Mitglieder

Posts: 2594

Member No.: 1411

Joined: September 26, 2007

Also the steam heating?

Gruß Stefan



--------------------
Esam 6600 PrimaDonna
Ich helfe gerne und freue mich über jede Rückmeldung, was leider nicht immer vorkommt. Fragen werden NUR im Forum beantwortet.

Mal bist du Hund, mal bist du Baum.

Reini

December 27, 2011 11:39 am

Unregistered

Hello Stefan,

the tip was great with the steam heater.

Many thanks ;-)

jokel

December 27, 2011 12:04 pm

*

Expert

Group: Mitglieder

Posts: 2594

Member No.: 1411

Joined: September 26, 2007

Here you go Reini, no cause. And thanks for the feedback.

Greeting Stefan



--------------------
Esam 6600 PrimaDonna
Ich helfe gerne und freue mich über jede Rückmeldung, was leider nicht immer vorkommt. Fragen werden NUR im Forum beantwortet.

Mal bist du Hund, mal bist du Baum.

Reini

December 28, 2011 03:48 pm

Unregistered

For the completeness of the solution:

Not the steam heater itself was defective, it had a resistance of approx. 40 Ohm.
When controlled directly, it warmed up.


What was defective:

Thermostat for steam heating 318°C

This did not have a passage, so it was defective.


>solution:

>2 new ones for ca 3.- Euro each purchased and installed.

And see there, the AEG went again as on the first day.


If one had a circuit diagram and the functional sequence with the run up, such errors would be substantially easier to find.

Can only thank you...

Beauty greetings

Guest

January 06, 2012 06:31 pm

Unregistered

Hello, I have the same problem. Where's the fuse? Was already in a repair shop, but they just wanted to sell me the whole thing (steam heating) for 50 €. Thank you in advance.

looser

January 06, 2012 08:18 pm

*

Expert

Group: Mitglieder

Posts: 2322

Member No.: 5600

Joined: October 28, 2009

Like here: http://www.juraprofi.de/DeLonghi-Ersatztei...318C::7983.html



--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

Guest

March 21, 2015 05:42 pm

Unregistered

QUOTE (Reini @ Wednesday, December 28, 2011, 15:48 hrs)December 2011, 15:48 hrs)
For completeness of solution:

Not the steam heater itself was defective, which had a resistance of about 40 ohms.


What defect was:

Thermostat for steam heating 318°C

This one had no more passage, so it was defective.


Solution:

2 new ones for approx. 3 each.- Euro.

And see there, the AEG went again as on the first day.


If one had a circuit diagram and the function sequence with the run up, such errors would be substantially easier to find.

So I can only thank you...

Greetings

Hello ,

I have the same problem I think I also need the thermostats.
Can you please give me a hint where you got them and how installed.
Greetings

Guest Michi

May 01, 2015 08:58 pm

Unregistered

Hello together,

have the same problem; where can I find the thermostat for the steam heating ?
?

looser

May 01, 2015 09:30 pm

*

Expert

Group: Mitglieder

Posts: 2322

Member No.: 5600

Joined: October 28, 2009

Google: Item no.: 5232105000



--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

back

New Topic

Print this topic
Next Oldest Next Newest