Advanced search

Cafamosa 85

starting problems

michi

May 12, 2014 03:42 pm

*

Coffee drinker

Group: Mitglieder

Posts: 23

Member No.: 2432

Joined: July 05, 2008

Hello together!
Have been having problems with my Cafamosa 85 lately. If I have it running instead of apparently a magnet (sounds like it), that repeats itself about 3-4 times (it takes a few seconds each time), then it starts 3-4 times (but much shorter) and then all the red and green lights flash alternately. Yesterday a one hour disconnection from the net helped, now nothing works anymore.
Why can it be, or what should I do (I still have a 1/2 machine in the basement for spare parts)?

Martin (Hobbytechniker)

May 12, 2014 03:51 pm

*

Expert

Group: Mitglieder

Posts: 1378

Member No.: 22501

Joined: November 20, 2013

There is a defect... it could be that the brewing unit does not move and therefore causes a malfunction..

You could remove and overtake the brewing unit...

rudi-03

May 12, 2014 07:01 pm

*

Expert

Group: Mitglieder

Posts: 1357

Member No.: 17460

Joined: September 16, 2012

Hello,

The best way is to put the device into operation when the housing is open.
This way the error can be more quickly limited. Could also be a defect in the solenoid for the drainage valve. The alternating red/green flashing normally means "brewing group cannot be positioned correctly".



--------------------
Gruß Rudi

michi

May 15, 2014 08:59 pm

*

Coffee drinker

Group: Mitglieder

Posts: 23

Member No.: 2432

Joined: July 05, 2008

Hello,
thanks to Martin + rudi for your answer, unfortunately I'm not smarter now. Anybody else got a hint? I would like to repair the machine, it has been working without a hitch all these years and has never let me down. Just a minute ago, I appreciate the craftsmanship.

Martin (Hobbytechniker)

May 15, 2014 09:30 pm

*

Expert

Group: Mitglieder

Posts: 1378

Member No.: 22501

Joined: November 20, 2013

Then please remove the brewing unit and overtake the... that will be the probable cause...

Instructions can be found at the BND-Kaffeestudio (Juraprofi) ..just like spare parts...

As such please order and execute... and the device could then run again..

zain123

October 25, 2014 09:51 am

*

Coffee drinker

Group: Mitglieder

Posts: 1

Member No.: 25427

Joined: October 25, 2014

Hello,
my machine has been fogging the display from the inside for a few days now, as well as the cover of the bean container from the inside. You "hear" directly the water vapor ... Now and then the coffee is also much too thin ... What could that be or what is to be done now? But I am only a layman :-) I have already cleaned the brewing sieve and decalcified it several times.
Many greetings
Bettina



--------------------
http://en.wikipedia.org/wiki/Juniper_Networks
https://www.facebook.com/ECCouncil
https://www.youtube.com/citrix
http://www.pass4sure.co.uk/HP2-K37.html
http://www.juniper.net/
http://www.uchicago.edu/

looser

October 25, 2014 10:23 am

*

Expert

Group: Mitglieder

Posts: 2322

Member No.: 5600

Joined: October 28, 2009

The machine should be opened and the cause investigated.



--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

rudi-03

October 25, 2014 11:19 am

*

Expert

Group: Mitglieder

Posts: 1357

Member No.: 17460

Joined: September 16, 2012

Hello Bettina,

Which AEG model is it?
The CF85 treated here does not have a display, so it cannot be.



--------------------
Gruß Rudi