Krups Orchestro Dialogue Conversion

I have an Orchestro dialogue, but milk frothing doesn't work out the way I imagine it. That's why I want to grow a cappuccinatore. Is it so easy?

Would it be the normal autocappuccinator or the "professional" better?
What is the difference?

Do you have the FNF1 or FNF2? With the FNF1 you simply have to install a short steam pipe (clipped in from behind by a bracket in the front, is a bit tricky, but not a big challenge). The FNF2 already comes with an autocappu, but it's not much good. However, the good Autocappus from Jura fit on the nozzle attachment without any conversion.

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Hi,
I got the FNF1. The one with the short steam pipe sounds pretty good. But I would prefer an autocappucchinator, which sucks in the milk independently and "veschäut". Is this also possible with the FNF1? If yes which Autocappucchinatore?

Of course this is also possible, the Autocappu is actually the only noteworthy difference to the FNF2.
The one with the short steam pipe I meant as a prerequisite to mount an autocappu, on the long steam pipe it doesn't make any sense at all.
You can mount any autocappu on it, a super overview is available'for example here:

http://www.juraprofi.de/index.php/cat/c382...uccinatore.html


>My favorite is this one:

http://www.juraprofi.de/product_info.php/i...-Siziliana.html

I've already put that on several Krups devices, works great and looks good too...

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Everything worked out fine. I followed your advice and used the autocappuccinator you suggested and rebuilt it according to the BND-Kaffestudio installation instructions and everything fits to your complete satisfaction.

Great, nice to meet you. Thanks for the feedback.

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.