Hello,
I have the following problem with my Seimens EQ6 Series 300:
- machine reports 'Refill with non-carbonated water or change filter'. The machine also shows the following on the display: Machine is being rinsed after service interruption. The machine then only pumped the water into the drip tray.
I then bought the ceramic valve and replaced it.
After reassembly:
- Machine starts again with "Machine is rinsing after service interruption" in the display
Then it rinses through the openings for the cups and through the milk wand.
At some point, it starts to clatter quietly and the display switches between "Machine is being rinsed after service interruption" and "Please insert drip tray".
It stays like this the whole time.
Does anyone know where the problem is now :-(
close
Share this post: