Hello, Forums "siker",
I am trying to repair my fully automatic coffee machine and would be happy if someone is there who could tell me which spare part(s) could help me based on the evaluation.
Heartfelt thanks in advance.
kalle.d
FEHERBESCHreibungUNG :
In the last 5-8 weeks, more frequently - BRÜHEINHEIT REINIGEN - was displayed, about every week. The brewing unit was always cleaned and then continued to run without any problems. In the course of a cleaning and descaling process, however, the machine stopped again and again after the 1st process - cleaning milk frother - with the note "Please call the hotline".
SDS - PRODUCTION DATA
Date : 20-09-2013, Version : 3.2
EQ.7 TE711509DE23 | M-Series/AromaSense,
SDS - COMPONENT TESTS:
PUMP 50ML: SDS: WATER 52ML CV:0
NTC H:26°C / C:20°C
GRINDER 5 SEC: SDS: WATER 52ML CV:0
NTC H:32°C / C:20°C
HE A 950W/3 SEC: SDS: WATER 52ML CV:0
NTC H:32°C / C:20°C (if I hold Start down the left
degree display rises/falls 1 +- 2° C fluctuating.)
HE B 950W/3 SEC: SDS: WATER 52ML CV:0
NTC H:32°C / C:20°C (unchanged)
CV STEP: SDS: WATER 52ML CV:0
NTC H:34°C / C:20°C (slightly increasing
BU DW: SDS: WATER 52ML CV:0
NTC H:35°C / C:20°C (slightly increasing)
BU UP: SDS: WATER 52ML CV:1,2,3,4
NTC H:35°C / C:20°C
and then autom. End SERVICE-MENU and then go to the aborted cleaning menu with restart
.
SDS - SENSOR:
DRIP TRAY: 0
REED UP: 1
REED DOWN: 0
BEAN: 1
BREW. UP: 0
BREW. DW: 0
POWDER COMP.: 1
SW-MILK: 1
SW-COFFEE: 0
DOOR OPEN: 0
SW-CW1: 1
SW-CW2: 0
MILK-FROTH: 1
DRIP TRAY FULL: 0
POWDER DETEC.: 1
AUTO SHUT OFF: 0
ERROR-MEMORY
OVERVOLTAGE: 0
UNDERVOLTAGE: 0
NTC AFTER: 0
NTC BEFORE: 0
BU TO: 18
BU OVER I: 37
CV TO: 0
PUMP TO: 96
OVERTEMP: 684
SHUTDOWN: 7
GRINDER OVER I: 0
SDS - ERROR LOG:
BREW MOD. UP: MOD:14 FUN:08 HEA:02
BREW MOD. DW: MOD:00 FUN:00 HEA:00
OVERPR. FACTOR: MOD:05 FUN:03 HEA:05
OVERPR TEMP: MOD:05 FUN:03 HEA:05
close
Share this post: