Hello all,
Have come across your forum and am hoping for community help with my problem.
I have a Siemens KVA eq6 300 and for a few days now the machine has been showing the message "refill beans" even though the bean hopper is full. Just ignoring it and continuing to press start, the coffee is made normally.
I have cleaned the brewing unit, cleaned the bean hopper and reset the machine via service menu. None of this has helped. After browsing div forums I have run out of ideas other than disassembling the machine to clean the grinder. Before I go that far, I am asking for your help and tips.
Btw. have read, you can reset the grinder, as follows.
- Coffee fill quantity regulator on small espresso set-
powder shaft drawer pull out-
then button OFF and START button both hold down and simultaneously turn on the device.
In doing this, it is not clear to me how to "set the regulator to small espresso".
Thanks for any help.
zacki
close
Share this post: