QUOTE (Guest1337 @ Wednesday, July 08, 2020, 4:50 pm) |
Has anyone already solved the problem with the protective compartment? The same thing happened to me a week ago: Called up coffee quantity menu, couldn't find a save button and therefore unplugged again. Since then, "Reinsert protective container" has appeared on the screen. Even a reset to factory settings didn't help.
Is an ea82 |
Yes, I have managed it, namely the menu has to be executed again by pressing the program button with pulling the plug, then I inserted the waste container and pressed hot water, then a test menu appears in French, for production I assume, because various functions are switched on there I clicked through with the button where it went on because I have a problem with the language, but then it came to me that possibly google or Apple translator on the cell phone with the camera function can be used to translate. Attention in the bean container maximum beans for 1-2 cups, because at the end the grinder runs through, I could not stop it with the button, I let it run for about 2 minutes and since it could not be stopped with any button, I pulled the plug, then my machine started as usual. To call up the service menu on machines with a display, the rotary knob must be pressed instead of the program button when the plug is inserted. However, I was unable to adjust the time, but the amount of coffee can be set using a 12 mm thick and 30 mm diameter plastic disk.
close
Share this post: