Hello,
thank you for your contribution. I also had the problem that the coffee was actually just a thin brew because it was simply ground too little. I then carried out the reset, and at first it seemed to have worked well. Since then, however, the machine has unfortunately been doing the following:
After pressing the right cup (strong coffee, 240ml are set) it makes a coffee. 120ml ends up in the cup, the rest runs out from under the machine. I think it comes from the grounds container, or from the "part above". After the coffee is "ready", it makes the noise again as if it wants to brew (only without grinding first). Then a few more drops (20ml??) come out of the coffee nozzles. Then it wants the grounds container emptied after every coffee. The grounds are just sludge and very wet. There is also coffee grounds residue in the drip tray.
I ran the reset again, no change. Is it now scrap? Maybe someone can help...
close
Share this post: