Krups 8245 Error code 5

I put the topic in the right forum! Sorry!




Moin,
have the following problem with my 8245

I haven't used it for a while.

Now the following happens:

plug in.
adjust time
self-test
preheat
therefore system has to be filled with water OK confirm
please place 600ml container under the water outlet OK confirm
approx. 50 ml hot water comes out then the whole thing starts again..
Self-test
Preheat
To do this, the system has to be filled with water OK confirm
Please place 600ml container under the water outlet OK confirm
Approx. 50 ml hot water will come out

Then error code 05

I did not find how to get into maintenance mode. Or what do you think the problem is? Vent? Flowmeter?

Hi,
I have the same problem. How has this problem been solved?
Thank you very much, Fila

Was there already a solution here?
Would be very interesting as I have a very similar error currently, but without error codes.

Hello everyone, currently after 8 years of problem-free use of the machine krups 8441 have the same problem. Machine goes into endless mode with self test and fill water circuit. At the end error code 4. then the same game from the beginning. Am in despair, because I have really loved the machine and so long time was never disappointed. Maybe someone has a tip. LG and thanks, Marco