Problems Siemens Surpresso S40
Posted by: FePo October 26, 2014 05:12 pm
Hey,
I wanted to make a coffee today with my Siemens fully automatic coffee machine (Surpresso S40), but the coffee doesn't come out of the front nozzles anymore.
Coffee is ground normally, water is drawn off, but instead of running into the front of the cup, the coffee remains in the machine or slowly runs out at the bottom of the machine.
has anyone had any experience with this?
thank you !
Posted by: numberonedefender October 26, 2014 08:23 pm
That sounds like a defective drainage valve. You should remove the cover of the drip tray and then watch a cup of coffee carefully; then you should be able to see where the coffee is leaking...
Posted by: Gast_Jay May 12, 2021 08:33 pm
| QUOTE (FePo @ October 26, 2014 05:12 pm) |
| Hey, I wanted to make a coffee today with my Siemens fully automatic coffee machine (Surpresso S40), but the coffee doesn't come out of the front nozzles anymore. Coffee is ground normally, water is drawn off, but instead of running into the front of the cup, the coffee remains in the machine or slowly runs out at the bottom of the machine. has anyone had any experience with this? thank you ! |
Hi I had the same thing I took the machine apart and there is a clear tube with a clip on it which has worked loose I applied some marine grade food safe sealant and let it dry for a day and its as good as new
Bean2cup.org > Siemens > Problems Siemens Surpresso S40