Hi,
the top part still comes off relatively easily when the locks are released, it is best to lever it up from front to back with a plastic part (cake scraper or similar) on the right side. But then I can't get any further, someone wrote in the spirit of "pull the back wall up and then take out the side panels." The back wall doesn't move at all, I could loosen the left side part, but it remains stuck to the back wall and then I can't get any further.
I would like to replace the instantaneous water heater, because the water (hot water supply) has a strong aftertaste in my EQ9. Cleaning or decalcification does not bring any improvement, I have drawn approx. 20l of hot water to rinse, has also not become
better.
I hope someone has a tip for me.
close
Share this post: