In advance..the Bosch and Siemens are identical in construction. So I post here.
I have with my EQ6 a suffering behind me. On Christmas Day came at once only half a cup of coffee and then actually only steam.
I gave the device at the local coffee seller in Reperatur since Bosch only had an appointment to 26.January 22 !!!!
After 2 weeks I got it back. It was supposedly cleaned and the seals of the brewing unit replaced. After that, the part worked about 3 days. Then the same error came again.
I took the machine back, they plugged it in and the thing worked fine. I again home, and the next day again the same error.
So I have the back again and the coffee fuzzi has probably replaced a solenoid valve(35 euros) and now it runs. Arrived home, connected and..nothing worked. No coffee, no hot water, only steam. Then I noticed that exactly the amount missing in the cup landed in the pomace. I went back and complained. And also noted where the water ends up.
He said that could now only be the brewing unit whereby it is not clear to me what hot water has to do with the brewing unit.
Well, after three weeks now I have the part back. He said they had done nothing to it, he had worked perfectly in the three weeks.
For me it worked yesterday and until this afternoon. Now again the same error.
I have left out the sheet metal in front, the red float and times at reference reingeleuchtet. It pees cheerfully in the pomace but nothing out in front.
What can be there?
close
Share this post: