Which pipe does the water flow through?
There is a solenoid valve inside which has a silicone tube at the top, as soon as the steam supply is over, the valve closes, so that the residual water in the vaporizer continues to evaporate through the residual heat of the tube, it builds up pressure, which then escapes via the closed solenoid valve to the silicone tube, where the steam condenses back to water and ends up in the pomace.
Which is also completely normal! safety-relevant, because none of the resulting overpressure is bursting.
If there is a problem with too little coffee in the cup, because water ends up in the pomace, then first of all take out the brewing unit, remove the sieve and scrub the inside of the brewing unit with a cloth, underneath there is a pin from the crema valve, check if it is
too tight.
If it was not, then you have to disassemble and clean the brewing piston and take pictures as a marker.
close
Share this post: