Nivona NICR 530
Posted by: Gast_Tim October 28, 2022 04:55 pm
Hello all together,
my NICR 530 is spinning since a few days.
When the machine is switched on and heats up, water already escapes via the milk frother during this process - drop by drop...
If the rinse is performed, the water also runs over the milk frother instead of - as normally - over the coffee outlet.
When coffee is drawn it behaves identically, the water is discharged via the milk frother and the freshly ground coffee loads dry in the marc.
I have already replaced the outlet valve (Y-shape), as I suspected this to be the source of the evil, unfortunately without success.
I look forward to any help.
Kind regardsTim
Posted by: Schlawi October 28, 2022 07:34 pm
Hi
,almost only the steam valve can be defective or it is open.
Bean2cup.org > Nivona > Nivona NICR 530