Hello, everyone,
I have an about 10 years old Bosch Benvenuto B30, which I have already successfully repaired several times by myself with the help of internet forum.
Currently the following problem:
Grinder was making increasingly strange noises as if it was having difficulty grinding the beans and less
and less ground coffee
came out at the end.
So I completely disassembled, cleaned and reassembled
this one. -->
Now the grinder makes only high noises but no more beans are ground and at the end the message "Fill
beans"
comes out.
What I noticed after disassembling the machine The mark for the position of the grinder was not exactly correct, so I made a new mark and reassembled it
accordingly.
What interests me now very much: Can an incorrect position cause
such a problem?
I am not sure if the old marking was just wrong or if something was wrong. I am now thinking about buying a new grinder and replacing it completely. I'm
just afraid that the problem might not only be with the grinder and I might end up with a broken machine + useless new grinder.
Best regards, Lstoever77
close
Share this post: