KRUPS EA81* EA8105 EA810507 Reset

After years, I have called up the post I wrote back then.
I was pleased to be able to give some help to one or the other.
I am not registered in this forum, so I cannot be reached directly.
If you have any questions about Krups machines, please post them here. I will check back from time to time.
Just today I repaired 3 Krups machines. Just a hobby and neighborhood help.

Hello good morning,

I have followed everything as described in the reset. Nevertheless, all 4 lights are red. It has been descaled and the float also works. As soon as I switch it on there is a soft click and all 4 lights turn red then nothing happens. :D

Hello good morning,

I have followed everything as described in the reset. Nevertheless, all 4 lights are red. It has been descaled and the float also works. As soon as I switch it on there is a soft click and all 4 lights turn red then nothing happens.

Hello,
thank you for your contribution. I also had the problem that the coffee was actually just a thin brew because it was simply ground too little. I then carried out the reset, and at first it seemed to have worked well. Since then, however, the machine has unfortunately been doing the following:
After pressing the right cup (strong coffee, 240ml are set) it makes a coffee. 120ml ends up in the cup, the rest runs out from under the machine. I think it comes from the grounds container, or from the "part above". After the coffee is "ready", it makes the noise again as if it wants to brew (only without grinding first). Then a few more drops (20ml??) come out of the coffee nozzles. Then it wants the grounds container emptied after every coffee. The grounds are just sludge and very wet. There is also coffee grounds residue in the drip tray.
I ran the reset again, no change. Is it now scrap? Maybe someone can help...

I originally started the article for the EA models 81XX WITH or WITHOUT cleaning slide.
models with display are NOT included. My instructions only describe the machines with volume control using a rotary knob and 4 buttons plus an additional service button.
Every reader and repairer should pay attention to which type of coffee machine needs to be reset, otherwise incorrect actions on machines that are not affected can lead to irreversible conditions.
The sequence of individual steps from my original article is still used by me today for the relevant machines and leads to success.

I am pleased if I have been able to help you. However, the credit does not go to me alone, but to an author unknown to me, whose procedure I have put into a readable text form and extended by 4 steps after I became a user of the instructions myself.

Too everyone with a EA81x WITH DISPLAY with a "missing waste container" bricked machine after trying to follow reset instructions read on:

The way to fix this is simple, and yet was impossible to find anywhere.

Hello,

I have an EA80 in the workshop, the grinding quantity is clearly too high, i.e. the grinder runs for too long. Does anyone have a table of the maintenance mode? There is a single digit display under the top front cover. Which numbers etc. have what meaning?
Thanks in advance.
It is sad that Krups does not provide this table, so that many machines can probably no longer be repaired. Sending it to Krups is definitely too expensive!