Schaerer Siena 2 ”level”

Hi
I have a Schaerer Siena 2 that shows the error code ”Level” or ”Nivå” as it is set in Swedish.
Anyone knows how to fix it?
Thanks in advance.
Andreas

Hi Andreas, have you found a solution for this yet? This is what the service manual, which I found online, says:

Error message "Level" (sTxt-49)
After water has been added for 1 1⁄2 minutes, the water level in the steam generator is still too low.

Possilble cause:
- Earth cable contacts
- Vibrating armature pump faulty
- Faulty feed valve
- Level probe furred or defective
- The control system is faulty

Remedy:
- Check the earth cable contacts
- Check function of vibrating armature pump
- Check function of feed valve
- Replace level probe Disassembling the level probe, paragraph 7.14, page, 7-27
- Replace control board Disassembling the control board, paragraph 7.26, page 7-39

With my machine I had the same message when I got it. The machine had been standing for a long time and the flow meter was clogged, 2 valves fouled and the pump fouled. As a result no water was getting into the boiler and steam boiler.

--------------------
Schaerer Siena 2 met vaste wateraansluiting (machine with mains water option)