Advanced search

Blocked brewing group

Farinin

October 14, 2014 06:50 pm

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 25350

Joined: October 14, 2014

Hello @all.
The brewing group of my NICR 620 is stuck. She's in the upper position, and I can't get her back. How do I unlock them or how do I get them back into their initial position?

Mickey

October 14, 2014 09:54 pm

*

Coffee drinker

Group: Mitglieder

Posts: 22

Member No.: 21838

Joined: September 19, 2013

Look here, Farinin. Maybe you'll find a tip.

greeting, Mickey

edit:
In the post preview a link appears at the word "here" - but after submitting I don't see one.
therefore in any case also so:

/forums/...showtopic=15907

kaffeechris

October 14, 2014 11:29 pm

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

Hello put the link in parentheses, because so anyone who needs it can also use it without ... see and copy.
MfG Chris



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

Farinin

October 15, 2014 07:10 pm

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 25350

Joined: October 14, 2014

Hello. I'm sorry I can't open the link. Could you post that again?

rudi-03

October 15, 2014 08:24 pm

*

Expert

Group: Mitglieder

Posts: 1357

Member No.: 17460

Joined: September 16, 2012

QUOTE
/forums/index.php?showtopic=15907
.
If you are in response mode, you can also open the link Mickey has given you.



--------------------
Gruß Rudi

Farinin

October 18, 2014 08:26 am

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 25350

Joined: October 14, 2014

Hello.
So I have the brewing group out again and my NICR620 is running again biggrin.gif

In the end, I used an external 9VDC power source (for me it was a laboratory power supply) to simply let the motor run until the brewing unit could be removed normally. After that I brought the motor back to the starting position with the ext. 9VDC power source, so that the brewing group could be used again.
Switch on! Go!

Thank you for your help!

Mickey

October 28, 2014 07:02 pm

*

Coffee drinker

Group: Mitglieder

Posts: 22

Member No.: 21838

Joined: September 19, 2013

QUOTE (kaffeechris @ Tuesday, October 14, 2014)October 2014, 22:29pm)
Hello put the link in brackets

Thank you!

Greeting, Mickey