Water circuit of caffeo bistro 960-105
Posted by: Sevgi November 18, 2022 09:42 pm
Hello TogetherThis
group I had already saved my Melitta from the bulky waste over 4 years ago. Now it is limping again.
No more coffee came out, instead it ran into the drip tray.
I took the unit apart and put in a new drain valve.
Now I feel like I connected the water hoses wrong ????
When I turn the unit on, the powder compartment light flashes. No water comes down when it heats up. There is just nothing that can be done. But when I turn the unit off it rinses normally, the water runs normally.
Can anyone help me with this? Or is there a drawing of the hoses so I can correct it?
Am grateful for any help ????
VgSevg
i
Posted by: Schlawi November 19, 2022 07:32 am
Forgotten to connect the plug for the powder compartment? It is in the upper part of the machine.
Posted by: Sevgi November 20, 2022 02:10 pm
I did. But I really have the feeling that it's the water hoses. Normally, water should also come out as soon as the machine heats up.
Posted by: Schlawi November 20, 2022 06:42 pm
If the message for the powder compartment lights up when switching on, then it can almost only be due to the plug or perhaps a missing magnet in the powder lid
.
Posted by: Sevgi November 21, 2022 03:24 pm
It was the cable after all ????
I was so sure I had everything plugged in.
Thanks for your help Schlawi. You are my salvation ????????
Drink now after a long time a real ☕ and hope that esso remainsVgSevgi
Bean2cup.org > Melitta > Water circuit of caffeo bistro 960-105