Posted by: waldspazierer July 29, 2019 11:06 pm
Hello, my good machine has had a make up for a few days now, when preparing coffee the grinder starts up briefly then it goes on fault. So 5 tarnishes, then 1 hot water, so I get a coffee. Even without coffee beans, the problem remains with the malfunction. Probably something on the board said goodbye. Need some help.
Posted by: waldspazierer August 22, 2019 10:54 pm
Hello, it's done, the magnet on the Hall sensor was out of the holder. There's coffee again.
Bean2cup.org > Quickmill > Quickmill 05000A malfunction