Bosch Verobar 100 Reset

Hello friends of the coffee pleasure,

I have here a problem with my Bosch Verobar 100 and do not know further. After the hotline couldn't help me either, I hope for your support:

I started the weekly cleaning program "Calc'n Clean" today, which also went through normally up to the point "coffee spout". However then - for me for the first time - appeared in the display "put on milk foamer". Since that time the machine has stopped and doesn't make a sound anymore - if I had a PC in front of me, I'd say it hung up "

The hotline advised me to disconnect the machine for an hour and then see it. Unfortunately this action had no effect, the machine still hangs at the same place.

I now put my hope on the community. Maybe someone has had the same problem before and can tell me how to do a "hard reset" at the Bosch Verobar 100 ?!?!?

Thank you and greetings
Simin

This will be similar to the Siemens EQ7 ..This is the sister model of the Bosch Verobar 100..

Google times afterwards...

Hello,

unfortunately I have the same problem. Putting the milk foamer is not recognized and you can not get out of the cleaning program as a result.

Maybe someone has a solution?

How to reset the?
It is Bosch VeroSelection 300

Keep arrow down and arrow up pressed while turning on main switch when werkreset is on release and press start

I had the same issue and could not even switch the machine off. So I disconnected it from the mains power. Then while holding down the up and down arrow buttons I reconnected it again. That did the trick and factory reset the machine.

It worked like a charm. The machine is working again, thank you very much for your help.