Advanced search

AEG Caffe Grande 6200

Jug wanders

zewe

July 06, 2008 06:44 am

*

Coffee drinker

Group: Mitglieder

Posts: 7

Member No.: 2058

Joined: March 14, 2008

AEG Caffe Grande CG 6200

I have 4 months now. A purchase argument was the brewing technique of deLonghi (before I only had frustration with the Melitta 76) and the can mode with included steel thermos flask.

The flask holds 10 cups, it is automatically 5x ground and brewed. Due to the unavoidable (?) vibrations, the jug wanders especially at the beginning of the brew when it is still light. Then it loses the magnetic contact after 1-2 cm distance, the machine switches off.

Pushing the jug towards the brewer does not allow the brewing process to continue, it must be restarted. Not earth-shattering, but annoying, if you are busy with tablecloths or anything else.

Thought a little bit and inserted into the front holes of the drip cover 2 screws extended by washers. Now the jug has no chance to migrate anymore.

image

Other satisfied with the machine, coffee tastes good. Improvement perhaps still another water level indicator from the front. When you are buying a can, you must remember to empty the pomace container and fill it with water yourself, because otherwise the whole process abwill be broken and not unterbroken, just like when the can is moving away.