Hello,
Just saw your question today.
You may still have the machine.
I am not fit at Koro's, but I occasionally wait for big machines from Necta.
Initializare db. ---
here the installation and initialization will be done.
there you can e.g. set language etc.
I don't know the key assignment of the Koro, but there are 4 assigned keys at Necta:
- before / greater
- back / less
- confirm / further
- back / ESC / quit
Find out which one is and run 'Initialisare db' once completely through.
Air Break:
The AirBreak is the small float tank with the micro switch.
It controls the water supply to the boiler.
If the micro switch gives a signal too often or too rarely or too long,
it goes to error message.
Example:
If the water supply is not open, no water arrives in the machine.
The float in the AirBreak goes down, opens the micro-switch, the micro-switch
opens the water valve, water DOES NOT come, micro-switch stays open..... Error message.
May be your machine is working again.
Greuss
close
Share this post: