ECAM 26.455 Descaling does not stop rinsing

i have the 26.455 i was told to decalcify as usual i do this, but at the end when she wants to rinse she doesn't stop anymore, when the tank is empty she breaks it off after a while, i clean the water again, rinse it to infinity, i break off the whole process, (current path ) i have to decalcify again at the start.
that's not so bad but i mean that after a certain amount of cups pulled them to make and you can't even brew coffee anymore without
decalcifying?
a maybe ne idea why it
can be ?
greetings

Hello,

that's weird...
When you have completely filled the water tank again after the decalcification process, it should normally
go
into the ready
state
after the rinse cycle and refilling of the tank
.

If the machine continues to flush and doesn't stop, you

might

want to

check the flowmeter

.



This measures the water flow. Maybe he's stuck

or he's broken. VGBernd

but if it was due to the flowmeter, wouldn't he just go on and on with the coffee or rinse it normally?

Yeah, he would... he would. That's right.
Then I don't know what his problem is either, sorry...