Gaggia Titanium

Our Gaggia Titanium is leaking. According to specialist dealers the usual problem of the 1st generation: the plastic seal. The repair costs should amount to 227 Euro !!!!. Who has the experience with this repair and costs

the gaggia titanium is identical in construction to the saeco incanto (gaggia italy is saeco)
and 227 Euro for a seal?
try here: http://www.kaffeemaschinendoctor.de/Repara...osch-Si::8.html

--------------------
Saeco Magic, Jura F70, Nivona CR740, Senseohasser (-;

The 227€ come from the fact that Gaggia, a flat rate per repair can be paid. So no matter how much is done, it always costs the same.

--------------------
VA-Werdegang: Jura E75 06.2006-10.2006 >>> Jura S9 Avantgarde 10.2006-07.2007 >>> 08.2007-04.2008: DeLonghi PrimaDonna
ST-Werdegang: Gaggia Evolution mit Demoka M-203 10.2007-01.2009 >>> Arte di Poccino Bar (ST+Mühle) seit 01.2009 >>> 03.2009 La Spaziale Mini Vivaldi II + Eureka MCI/T

Gaggia does not offer FPR! Only Jura does that! Gaggia offers Service Checks which are performed at a flat rate!

--------------------
Saeco Magic, Jura F70, Nivona CR740, Senseohasser (-;

the machine is running out can have several also more serious consequences.

Often connections to and from the boiler are affected. This expenditure can be paid the contract workshop sometimes princely.

Who gets to a black sheep, can be also before exchange of other, not always really affected, components not safe.

Power board or even boiler itself, if it says: Connections are no longer to be sealed!

A layman therefore chooses at best a workshop of his trust preferably in his residence proximity.

In this process, later possible complaints about the repair (which is not uncommon) must not be clarified exclusively by telephone but personally.

--------------------
Gruß, Saeconutzer
---------------------------------------------