After the bean container and the upper cover plate have been removed, the control panel must be levered out with a screwdriver or similar tool bent at a right angle, as it is not screwed here, but fixed like a push button. If you have done that, you have to remove the coffee spout, because behind it is a screw from the lower front panel. Here you can unlock the right side, when the spout is pushed downwards, by pushing it with a screwdriver. Then press the left side backwards with a slim screwdriver and push the coffee spout upwards at the same time, when it is removed you can reach the screw. Now the way is free to remove the lower cover, now you can reach the screws of the housing ;Now remove the 2 screws at the back from the bottom part to the housing ,pull off the housing. Hope to have described it in some way.
close
Share this post: