camel

Hello

I have a problem, I don't know what else to do

The device has worked with agonizing noises from drive I have cleaned it disassembled cleaned greased it works again normally.
Then I cleaned the drainage valve and installed it. After that
it did not work anymore.

Then I read that the drain valve

is

defective

and bought a new one.

I accidentally bought a new version instead of the old one and replaced the driver of the actuator because I thought that one of the brackets was broken and

that this could be the fault.

Coffee is coming out of the bottom left side and the coffee grinder is dry

as normal.

As I have tested, one of the pins of the driver is broken off and it does not turn (did I

screw it tight?

) As I removed the BG, the lower side was stuck and was no longer moveable. Now

it works

again (maybe there is something
wrong
with it)

.

I hope you could

help

me

Thank you

Can't nobody help me here

super Service

Put in a picture of the mounted drain valve.

The support here in the forum is from laymen,
maybe there was no USER online who
has
this machine and also
has
this
problem.
And honestly? Nobody can understand the crazy stuff you write
.