Hello, there is a problem with the grinder and the ohmic resistance.
The first thing I would do is empty the bean hopper and then press until everything is empty in the grinder. Blow out the grinder with compressed air. Remove the powder compartment drawer, is a little tricky but if you look closely you will see a small flag / tab that you must carefully lever away. Clean the powder compartment.
Then set the grinder to the lowest level.
I wish you good luck. I think, otherwise the KVA must have another new grinder.
MfG Chris
--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.
close
Share this post: