I have a problem with my AEG CaFamosa CF85 and have found this forum. I don't have any knowledge of electronics, mechanics in so far that I could open the machine without breaking anything ;-).
Now about my problem: When the machine is switched on, some water runs out permanently in the lower right corner. A puddle thus forms under the machine. When the machine stops, no water will leak. I have photographed the place where the water escapes. It's where the blue hose is in the black plastic part. There is also a small metal clamp, which I have already pulled off and pushed a little tighter again. But this was not successful.
My question now: How do I get this spot tight again, what needs to be repaired or if necessary which spare part needs to be replaced.
I am looking forward to your tips and thank you in advance. Greeting topdancer
There's a clamp in the black plastic part. Pull these out. Then the blue hose can be removed. There's an O-ring on it, or in the opening. Change it and reassemble it. There you go.
-------------------- Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)
thank you very much for your tip. I installed a new O-ring, the machine is tight again and my wife is unhappy. She had already hoped to get a new fully automatic machine
close
Share this post: