So, now have the brewing group completely disassembled and cleaned, all seals replaced, the metal sieve decalcified separately (under the sieve was nothing to see).
Unfortunately, still the same problem. At maximum draw amount (Crema, 240 ml), about 120 ml ends up in the cup. The rest drips into the drip tray in the machine. Some of the drips fall down at the very back of the machine, some further forward.
I am now running a double descaling again. However, I have a descaling system in the drinking water system anyway, so too much lime usually does not settle. Do you have any other idea what it could be?
Many greetingsHarald
close
Share this post: