cg6600

Hello, after brewing coffee, rinsing the container is full of water, what can it be? In addition, the coffee ground is not dry and pressed. Who can give us tips . mfg juezan

Remove back wall and look during a cover where the water comes from in the thick tubes. Either change overpressure valve or 3-way valve.

Brew group and actuator must run smoothly. Change the 3 large O-rings and lubricate the running surfaces lightly with silicone grease.

--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

Hello, after making coffee again and then rinsing, the container is full of water and besides, the coffee ground is not pressed properly, is damp and loose. (Had previously indicated the wrong machine,) therefore again juebaer brewing group was allegedly waited. The right machine is Siemens TK76k573 sorry