Advanced search

back

New Topic

Impressed S9 Drainageventil

Dihenad

March 30, 2020 10:37 pm

*

Coffee drinker

Group: Mitglieder

Posts: 5

Member No.: 37145

Joined: January 26, 2020

Hi,

cleaned the brewing unit of my Impressa and sealed it with new rings.

The same applies to the drainage valve - but here the following "error" occurs:

Machine is on and is not used, then it seems as if the machine suddenly draws air and afterwards hot water is sprayed out of this nozzle (photo).

Is this process normal? Because the valve that can be seen is also soaked over and over again.

Is the assembly correct --> nozzle correct? I kind of lack the purpose for that...

Best regards

Attached Image

back

New Topic

Print this topic
Next Oldest Next Newest