Jura Impressa Cappuccinatore

Hello together ,

>have the following problem with my law :

When I leave coffee out the amount is always different
and I get a lot on the right outlet less coffee comes out than the left one so it's also on the rinse !

I first thought about the pump but when I take hot water I have no problems .

Please for help !!!33;

Then your outlet can only be clogged. He likes to drink, especially with this type of machine. Here you will find instructions how to open the device.

http://www.juraprofi.de/Service-Anleitunge...a518a8f95825a67

The rest I will explain afterwards, if you believe yourself to be able to clean the outlet etc.. And while it is already open, I would also revise the brew group at the moment, then you are on the safe side. Maybe your brewing sieve is also easy to use ;-)

Hello , many thanks for your info !

the brewing unit I have already once exchanged but the outlet is clogged can be already .
Will see, how do I best before ?

Open the front door in the same way as for changing the brewing groups.
Then you can push a catch nose and push the spout a little further upwards, be careful when removing a ball and a spring fall out.

You can then divide the spout into 3 parts again with 4 catch noses.

--------------------
Quick Mill 05000 "Unique Edition", WMF Ecco

Hello ,

checked everything and it was the brewing unit !

I didn't have any new gaskets and took the old ones that
were still good !

After that everything was put back together again and everything ran !

Thank you for your help !!!thanks for your help;