Miele CVA 5060 (2009)
Posted by: Pilotedh November 15, 2020 07:43 pm
Good evening Members,
My Miele CVA 5060 is playing up. During the set up from power on, the rinsing is not coming out of the two central coffee spouts. The rinse water ends up in the drip tray and waste container.
I've taken the brew unit out, cleaned it of residual coffee powder. Washed the unit. Checked that coffee central spout connector is clear back to the brew unit - it seems to be.
The coffee making filter has been removed and cleaned.
After all this, I've place the machine into Brew unit clean mode. And still, no liquid comes from the two central points. I can hear the pressure pump straining against a blockage.
Any help would be most appreciated.
Thanks,
Ed
Posted by: Jalla January 10, 2022 08:34 pm
I have the same problem. Did you find a solution?
Br
Jalla
Posted by: Ed January 12, 2022 11:25 am
Jalla,
I'm afraid I never managed to resolve the problem with the brew unit. Even after stripping the unit down and cleaning all the parts, I failed to resolve the issue.
There was the option of buying a new brew unit, but at the cost of Euro 200+, I thought it might be 'good money after bad'.
I sold that house and left the Miele coffee machine behind.
Regards,
Ed
Posted by: Gast_thomas February 11, 2023 04:19 pm
that was a good easy solution, I did the same.
Posted by: Gast_Simon January 07, 2024 12:14 am
I have exactly the same issue! Any coffee or water just gets delivered straight into the drip tray and nothing comes out the main dispenser on the front. Did you find any solution at all?
Posted by: counterfactual January 07, 2024 12:17 am
I have exactly the same issue! Any coffee or water just gets delivered straight into the drip tray and nothing comes out the main dispenser on the front. Did you find any solution at all?
Bean2cup.org > General > Miele CVA 5060 (2009)