Hi all
,on our Krups EA8808, both when brewing a coffee and during the cleaning function, the hose that goes from the brewing unit (I hope that's the right name) to the top front of the outlet comes loose. On the other side, the hose is attached with a clamp and I would actually guess that the side where it comes loose is missing such a clamp. But I'm not sure if this is really the case and so far I haven't seen such a clamp anywhere as a spare part (except on Russian sites). It should be the part with the number MS-0A17656 on this picture.
On the following picture I marked the place with a red arrow, where the hose jumps off directly although it sits relatively firmly on it if I pull at it with the hand:
Can someone tell me whether a clamp belongs there or why the hose could jump off otherwise? I have disassembled and cleaned the outlet as much as possible.
Thanks in advance,
Werner
close
Share this post: