Hello, a circuit board the size of a matchbox sits at the bottom of the brew drive. Reedplatine called, which could be defective. Is the drive spindle greased and the mounting of the brew group may only have a clearance of 3-5 mm. Otherwise, replace the nut. Grease best food genuine.
I would start by looking through the spindle and nut, then continue here: Empty the bean compartment completely and draw min ten cups of coffee.
Ignore the message Fill beans. Then fill the bean compartment again and see if everything settles down again.
--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.
close
Share this post: