Help...up to now we could always somehow get a grip on all reports or problems of our 7 years of firmly installed coffee machine. But since 2 days we have tried everything to deactivate this suddenly appearing message. The machine still had 2 covers before the upcoming decalcification - presumably this is the reason for this message. Unfortunately I was not there and therefore I cannot quite understand it. The contacts on the drip tray are bright as lightning. The contacts in the device look normal. The drip tray was pushed in and out several times while the system was switched on. No movement. Even when switched on, removing the drip tray does not change the permanent messageOnly when I remove the brewing unit does it react and then display the message Insert brewing unit. When this has been done, Empty drip tray appears again. The main switch and also the fuse was turned on and off several times. I only know the problem during/after decalcification when a lot of steam has escaped, but then it could be solved quickly.
I really hope somebody else has an idea. I'm already coffee-deprived.
close
Share this post: