Advanced search

Carmen26

Rotel Aromatica Luxe 270

Carmen26

June 21, 2014 12:06 am

*

Coffee drinker

Group: Mitglieder

Posts: 2

Member No.: 24537

Joined: June 21, 2014

Hello.
Just got a used coffee maker that hasn't been in use for a year.
Decalcified and cleaned.
The coffee tastes very good but coffee drips out on all sides when it's going out (so not "only" from the nozzles).
Can anyone help me?
Many thanks in advance.

kaffeechris

June 21, 2014 12:21 pm

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

There again look whether you find something there that you forgot to clean, possibly the coffee flow times to inspect, scarf defective or with coffee fat added.
Mfg Chris



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

numberonedefender

June 21, 2014 12:30 pm

*

Expert

Group: Mitglieder

Posts: 2539

Member No.: 2650

Joined: August 21, 2008

The spout can be dismantled, but it may be sufficient to pierce the spout nozzles with a paper clip or similar and rinse several times, shaking the spout up and down with controlled force. If the outlet is pushed several times (strongly) to the lower stop during rinsing, the residues in the nozzles are usually loosened...



--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

kaffeechris   

June 21, 2014 02:26 pm

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

Hello that would be only a beginning with the paper clip, but I would rather disassemble it carefully, and clean it reasonably. This also ensures a lot. Don't want to find any strange coffee fat lumps in my cup.brrrrrrrrrrr blink.gif
MfG Chris



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

numberonedefender

June 21, 2014 06:34 pm

*

Expert

Group: Mitglieder

Posts: 2539

Member No.: 2650

Joined: August 21, 2008

I would also dismantle the outlet, but maybe Ottonormal fully-automatic users don't dare to try it, so first the variant without screws would be worth a try wink.gif



--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Carmen26

June 22, 2014 08:11 pm

*

Coffee drinker

Group: Mitglieder

Posts: 2

Member No.: 24537

Joined: June 21, 2014

Thanks a lot for your answers!
We carefully took the part apart and washed it out with a Pummpe (for Luftbalone)
.
Igitigit came out with a lumpy stuff...but now everything works fine and you get fresh coffee smile.gif.
Lg

kaffeechris

June 23, 2014 05:36 pm

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

Again somebody happy biggrin.gif ,
You might want to check if you don't send a cleaning tablet through the system more often.
Sicherlich your cleaning also goes with a balloon pump, but I would get a larger disposable syringe for it zulegen.bekst you certainly with your family doctor for bisserle for the coffee box. wink.gif
We should also introduce them here laugh.gif
MfG Chris



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

Gast_Bruno

June 13, 2015 07:36 am

Unregistered

QUOTE (numberonedefender @ Saturday, June 21, 2014, 12:30 pm)
The spout can be disassembled, but it may be sufficient to pierce the spout nozzles with a paper clip or similar and rinse several times, shaking the spout up and down with controlled force. If the outlet is pushed several times (strongly) to the lower stop during rinsing, the residues in the nozzles are usually loosened...

Hallo Zusammen
JUST TODAY I am facing the same problem.
Please give me a hint how to decompose the coffee spout. Is there a screw hidden or is the whole structure just stuck together. In which direction can you move without leaving any damage?

Many thanks