Stenter is a kind of typical textile printing&dyeing machienry ,which in the printing&dyeing of textile processing has played very important role, it makes the fabrics of various materials more beautiful . How does the Hot Air Stenter change the fabric? What parts are they made of?
Function of stenter:
Width of the fabric is controlled by the stenter.
Heat setting is done by the stenter forlycra, synthetic and blended fabric.
Finishing chemical apply on fabric by the stenter.
Moisture of the fabric is controlled by the stenter.
GSM is controlled by stenter.
OBA is added to the fabric
Shrinkage property of the fabric is controlled.
Indigo coating is given to the fabric.
1. The fabric is collected from the batcher to the scray and then it is passed through the padders where the finishes are applied and sometimes shade variation is corrected.
2. The fabric is entered into the weft straightener the function of the weft straightener
3. Is to set the bow and scew of the fabric. Then the fabric comes into stretching section. Here the fabric stretch and open of crease done by a screw roller.
4. After stretching the fabric passes through the drying chamber (8 chamber) to the cooling drum, the drying chamber has a heat recovery chamber and 8 blower, the blower circulate the hot air evenly in the chamber.
5. After passing through the cooling drum the fabric is ready for batching.
The Licheng Stenter gives you a wide range of options to let you be able to process the fabric the way you like it. Licheng Stenter is fully produced in China, and features the latest in technology.Click the https://www.hotairstenter.com/product/hot-air-stenter.html for extra information on Hot Air Stenter Manufacturer
https://sealion-gold-jlal.squarespace.com/
http://stenterlicheng.zohosites.com/
http://stenterlichengfactory.bravesites.com/
https://5e9184316669f.site123.me/
http://www.stenterlicheng.wv.to/
http://stenterlichengmachine.simplesite.com/
close
Share this post: