Philips EP5331 Test Mode + Hard Reset
Posted by: Lesneg January 28, 2023 11:08 pm
Hello,
cause of troubleshooting was that the grinder does not run and the error "wrench 2" is displayed.
According to a post, you should check the values in the test menu.
(hold Cappuchino+Menu buttons and turn on main switch/mains)
In doing so, I accidentally changed the values in the "Heater" and "Grinder" display.
In photo 1, the displays are still unchanged.
In photo 2, you can see the changed values/displays.
In addition, the values are now also shown in the normal display.
A repeated disconnect from the mains and a simple reset (in the normal menu) has brought nothing.
How does a HARD reset?
Or do you have to leave the test mode with a key combination?
Also repeated start in the test mode changes nothing.
How do I get back and can possibly adjust the values again?
Or is there even a possibility to optimize the values and which values would be optimal?
Thanks already.
https://www.directupload.net/file/d/6809/h6bzlb6u_jpg.htm
https://www.directupload.net/file/d/6809/pkeo8eqo_jpg.htm
Posted by: kaffeechris January 29, 2023 10:28 am
Hello, photo maybe wrong format ending or too big MB.
Bean2cup.org > Saeco > Philips EP5331 Test Mode + Hard Reset